Servicing the entire greater Sydney regionEmail our office
Revive Appliance & Property Maintenance

Inside Our Repairs

There’s More
Under the Cover.

A look at the parts behind common appliance faults — and the completed repairs that followed.

Find the Fault.
Then Fix What’s Failed.

A dishwasher that stops mid-cycle or an oven that stays cold can have several possible causes. We assess the appliance and explain what the findings mean before recommending the work.

These photographs come from our own repair visits. Each story links the fault, repair and documented test result for that appliance.

Earlwood / Omega Oven Repair

Heat and Light Restored

Replaced the failed oven element with a 2200W element and replaced the oven globe.

Read the Full Repair Story
Broken section of the failed circular heating element removed from an Omega oven
The FaultThe failed oven element after removal.
Omega oven controls and lit interior during the post-repair heating check
Tested & WorkingBack under test: the oven's heating and internal light were checked after the repair.
Result

The oven was reassembled and tested, with heating and internal lighting restored.

Camperdown / Haier Washing Machine Repair

A Washer That Would Not Drain

Removed a five-cent coin from the drain pump assembly and cleared dirt and debris from both water inlet points.

Read the Full Repair Story
Exposed drain pump and hoses beneath a Haier washing machine during repair
Inside the RepairInside the Haier washer: the drain pump assembly accessed during the blockage repair.
Reassembled Haier top-loading washing machine with its control display illuminated
Reassembled & TestedReassembled and checked: filling, pumping and draining were confirmed in the service report.
Result

On-site testing confirmed normal filling, pumping and draining after the blockages were cleared.

Chatswood / Miele Dishwasher Repair

A Small Valve, A Working Dishwasher

Replaced the faulty non-return drain valve and reassembled the dishwasher.

Read the Full Repair Story
Removed and replacement non-return valves from a Miele dishwasher
The Replacement PartThe old and replacement non-return valves from the Miele drain repair.
Integrated Miele dishwasher fitted beneath a kitchen bench
The ApplianceThe same integrated Miele dishwasher. Normal drainage was confirmed by testing and a later resident follow-up.
Result

Multiple fill-and-drain tests confirmed normal drainage. The resident later confirmed the dishwasher was working.

St Leonards / AEG Dishwasher Repair

Finding the Cause of Water Build-Up

Returned to investigate the later symptom and replaced the dishwasher water inlet valve assembly.

Read the Full Repair Story
Internal hoses, wiring and water-system components beneath an AEG dishwasher
Inside the RepairA clear view beneath the AEG dishwasher during the repair visit.
Result

The dishwasher was tested after repair. Four days later the customer reported no leaks or water build-up, and later thanked the team for the work.

Cooktop Ignition

Burners
Back on.

A Miele gas cooktop needed an ignition box and a burner spark component. The repair was completed and the burners photographed operating.

See the Cooktop Repair
Miele cooktop with its burners lit after the ignition repair
The Miele cooktop after the ignition repair.

These photos show our technicians’ work. For your enquiry, photograph the appliance as installed and any easily accessible model label. Leave covers and connections in place.

Appliance Installations • Repairs • Property Maintenance

Tell Us What Your Appliance Is Doing.

You don’t need to diagnose it. Send the symptoms, model details and photos you can safely take.

Send a Service Requestor email the Revive team
Request a Repair or Installation